PMAPI offers a complete Zone 1 & 2 solution to CAA-UK CAP 437 and ICAO Annex 14 requirements for Offshore Helideck Aviation Lighting, which includes our PHARODECK™ Touch Down Perimeter Marking (TD/PM) system, perimeter lights, helideck status lights, surface floodlights, illuminated wind sock and helideck lighting controller.
As defined in the UK Civil Aviation Authority (CAA) Civil Aviation Publication (CAP) 437 standards, TDPM Circle & H systems will be mandatory in UK waters after March 31, 2018, after which, any helidecks out of compliance will be limited to daylight flights only.
To ensure compliance by this date, please contact your local representative.
The system is designed to provide our customers with a cost effective offering that can be easily maintained as a long term solution to Helideck lighting.
The modular design allows for accelerated installation time due to the interconnection of the cables being incorporated into preassembled deck plates.
- Minimal on-deck connection time
- Accelerated Installation
The segment design is engineered such that in the unlikely event that a failure of element segment/sub-section is encountered, a replacement segment can be readily fitted by means of accessing the internal junction box to remove the connections, then removing the segment from the mounting plate and replacing the segment.
- Reduction in costs for system replacement parts, and System O&M
- Simplistic change outs, with recommended spares as part of system package
Helideck survey to assess best fixing methods for retrofitted and new build helidecks considerations including:
- Helideck Deck Weld seems ü
- Accurately determine number of fixings
- Helicopter wheel horizontal loads
- Fixing pre-tension force
Visibility: per CAP 437 requirements
Ideal for: offshore helideck lighting systems
A complete Zone 1 and Zone 2 Touch Down and Perimeter Marking (TD/PM) System solution to CAA-UK CAP 437 and ICAO Annex 14 requirements.
View: Data Sheet | UK CAA Statement of Compliance | ATEX Certificate
Visibility: CAP 437 Green
Ideal for: marking the perimeter of helideck
The FA‐80EX is a LED based Low Intensity Helideck Perimeter Light designed for extreme environments such as high UV, corrosive gasses and marine conditions encountered on offshore oil and gas production facilities, drilling rigs, support vessels and refineries.
Designed to be placed in remote locations, the lantern incorporates very long lived LED’s to minimize scheduled maintenance. The FA‐80EX is fully compliant to CAP437, and meets the latest regulatory requirem
View: Data Sheet
Visibility: per CAP 437 requirements
Ideal for: warning if conditions on an installation are potentially hazardous to a helicopter or its occupants
The FA-165EX Helideck Status Light is a Zone 1 rated, red flashing omnidirectional light designed for offshore Oil and Gas Drilling & Production Platforms and FPSO applications. Compliant with CAP 437, the FA-165EX Helideck Status Light consists of an array of high flux LEDs mounted inside an ATEX & IECEx certified flameproof transparent enclosure..
View: Data Sheet
Visibility: per CAP 437 requirements
Ideal for: warning if conditions on an installation are potentially hazardous to a helicopter or its occupants
The FA-165EX 04 Helideck Status Light Repeater is a ZONE 1 rated, red flashing omnidirectional light designed for offshore Oil and Gas Drilling & Production Platforms and FPSO applications. Compliant with CAP 437, the FA-165EX Helideck Status Light consists of an array of high flux LEDs mounted inside an ATEX & IECEx certified flameproof transparent enclosure.
View: Data Sheet | Certificates
Visibility: conforms to CAP 437 requirements
Ideal for: spot and flood light applications
The FA-167EX LED Lighting Fixture provides a low dazzle source for internal illumination of windsocks for helidecks and other area illumination requirements. Its rugged, heavy-duty construction provides superior performance to plastic products in high temperature and high UV marine environments.
The flood light unit is completely compliant to the latest CAP 437 requirements. The stainless steel hood prevents the possibility of pilot glare. The unit, rated for high temperature applications, is highly durable and easy to insta
View: Data Sheet | Certificates
CAP 437 Floodlight
Ideal for: marking the perimeter of helideck
The FL220-Ex is a compact, lightweight, and LED floodlight designed for use in harsh marine applications. Its rugged construction and waterproof design make it ideal for offshore oil and gas production facilities, drilling rigs, support vessels and refineries.
Designed to be placed in remote locations, the lantern incorporates very long lived LED’s to minimize scheduled maintenance. The FL-220Ex is fully compliant to CAP437, and meets the latest regulatory requirem
View: Data Sheet
Offshore Ex Central Photocell
The FCHA-51MKIII is the new Pharos Marine Photocell series. The new lightweight photocell can be made from marine grade aluminium or stainless steel. The FCHA-51MKIII can be used with the Pharos Marine PE module for the lanterns control or with the more advanced PLC systems for more complicated control systems.
View: Data Sheet