In support of the requirement for navigational and marine obstruction marking, PMAP has developed and supplied a wide range of non-hazardous and hazardous area renewable power systems which are customised solutions to suit temporary, or long term abandonment strategies whilst ensuring full compliance with current legislation and recommendations as a standard.

Solarised and/or hybrid wind powered skid systems are adaptable to customer equipment or load requirements designed for ease of use and reliability. With advanced remote monitoring capability, unmanned assets can be safely and confidently monitored for continued compliance and operational security from any location.

Systems include full documentation packages, manuals, test data sheets, FAT reports, engineering calculations and electrical drawings that are supported by our field engineers. Our engineers are available for pre-installation surveys, installation, commissioning and maintenance work scopes.

For more information about our Decommissioning and Monitoring Systems, please contact your local representative.

The Pharos Advantage

Skid Frame Work and Fixing Method

Skid Frame Work and Fixing Method

Our standard solar panel skid design has been installed in various locations in the North Sea, calculated against the 50 year wind loading data.

Skid systems can either be bolted directly or welded to the deck base plinths can be supplied for faster installation via a single crane lift. Options are also available for no fixings which are supported by structural calculation for overturning and sliding resistances.
System Deployment

System Deployment

Deployment by support vessel with sufficient crane outreach; the system weight would be confirmed following solar calculations.

Deployment by helicopter using over slung load by means of vertical capture.
Installation Time

Installation Time

Our standard solar skid design should take no more than 1 shift to complete installation and commissioning.
Maintenance

Maintenance

Systems are designed to be maintenance free for a specified period of operation to a maximum of 5 years.
Recommended Products

    • FA-249EX Stainless Steel LED Marine Lantern

      FA-249EX Stainless Steel LED Marine Lantern

      Range: 3-10NM at 0.74T
      Ideal for: fixed offshore structures, buoys, jetty lights; can be used as 3NM Red Subsidiary Light or 10NM White Main Light

      Zone 1 rated LED marine lantern that is suitable for highly corrosive environments due to a complete 316 Stainless Steel body; compliant with IALA and DECC recommendations. Available in IALA white, red, green and amber.

      View: Data Sheet | Certificates

    • FA-250EX-962 LED Marine Lantern

      FA-250EX-962 LED Marine Lantern

      Range: 3-15NM at 0.74T
      Ideal for: offshore oil & gas drilling and production platforms; terminals, refineries.

      Flameproof Zone 1 rated long range LED marine lantern featuring the latest LED technology; compliant with IALA and DECC recommendations. Available in white, red, green and amber.

      View: Data Sheet | Certificates

     

    • LIEX Stainless Steel Fog Signal

      LIEX Stainless Steel Fog Signal

      Range: 2 NM
      Ideal for: offshore platforms & drilling rigs

      Zone 1 rated, compact and reliable explosion proof fog signal emitter designed for deployment as a 2NM sound signal as designated by IALA for audible warning for offshore structures.

      View: Data Sheet

    • LIEX 710 Zone 1 Fog Signal

      LIEX 710 Zone 1 Fog Signal

      Range: 0.5 - 2NM
      Ideal for: offshore platforms & drilling rigs, offshore wind farms, bridge navigation, CALM, SALM & SPM buoys, FPSOs

      Single, double or triple emitter, 0.5 - 2NM fog signal designed at an optimum frequency to maximize range rating for both U. S. Coast Guard and IALA criteria. For use in Zone 1 & 2 hazardous locations.

      View: Data Sheet | Certificates

    • Zone 1 Nav Aid Skid System

      Zone 1 Nav Aid Skid System

      Range: 10NM at 0.74T
      Ideal for: fixed offshore structures

      Zone 1 marine navigational aid skid system that includes a 10NM main lantern, 2NM/0.5NM fog signal, fog detector and battery backup system.

      View: Data Sheet

    • FA-80EX Helideck Perimeter Light

      FA-80EX Helideck Perimeter Light

      Visibility: CAP 437 Green
      Ideal for: marking the perimeter of helideck

      Zone 1 rated, CAP 437 compliant low intensity LED Helideck Perimeter Light. Available in 316 Stainless Steel or Marine Grade Aluminium.

      View: Data Sheet

    • Pharos Marine Automatic Power Helideck Status Light

      FA-165EX Helideck Status Light

      Visibility: per CAP 437 requirements
      Ideal for: warning if conditions on an installation are potentially hazardous to a helicopter or its occupants

      Zone 1 rated, CAP 437 certified flashing red omnidirectional helideck status light.

      View: Data Sheet

    • FA-165EX Zone 1 Helideck Status Light Repeater

      FA-165EX Zone 1 Helideck Status Light Repeater

      Visibility: per CAP 437 requirements
      Ideal for: warning if conditions on an installation are potentially hazardous to a helicopter or its occupants

      Zone 1 Rated, CAP 437 certified red omnidirectional helideck status light repeater.

      View: Data Sheet | Certificates

    • FA-167EX Flood Light

      FA-167EX Flood Light

      Visibility: conforms to CAP 437 requirements
      Ideal for: spot and flood light applications

      Flameproof Zone 1 rated LED Flood Lighting Fixture for CAP 437 requirements and ICAO signalling recommendations.

      View: Data Sheet | Certificates

    • HG-80EX Lighted Wind Direction Indicator

      HG-80EX Lighted Wind Direction Indicator

      Visibility: per CAP437 requirements
      Ideal for: offshore oil & gas platforms, drilling rigs and FPSOs

      The HG-80EX Lighted Wind Direction Indicator is the offshore solution for the perfect wind direction indication. All of PMAP’s wind direction indicators come factory standard with a full LED solution.

      View: Data Sheet | Certificates

    • Industrial Grade Solar Power Systems

      Industrial Grade Solar Power Systems

      Ideal for: offshore oil & gas production platforms, offshore wind farms, remote locations

      Customised solar power systems which may be designed to be fully compliant with NEC Class 1, Division 2 Hazardous Areas requirements or IEC Zone 1 or Zone 2 Hazardous Areas.

      View: Data Sheet

    • SPEX Zone 1 Solar PV Module

      SPEX Zone 1 Solar PV Module

      Ideal for: remote power requirements in Zone 1 hazardous area locations

      The SPEX Zone 1 rated Photovoltaic Modules are suitable for a wide range of client projects in demanding gas & dust hazard environments. Suitable for use in any climate; highly resistant to water, abrasion, hail impact and other severe weather conditions.

      View: Data Sheet

    • Battery Boxes

      Battery Boxes

      Ideal for: remote Solar PV powered systems, Zone 1 UPS systems, navigation systems & more

      Zone 1 & 2 rated explosion proof battery boxes feature the versatility to house any type of sealed Nickel Cadmium or Lead Acid battery from all recognised battery manufacturers. Available in 316L stainless steel, and galvanised or painted steel.

      View: Data Sheet

    • TVR Series Zone 1 Battery Chargers

      TVR Series Zone 1 Battery Chargers

      Ideal for: Zone 1 UPS systems, navigation systems & more

      Compact switch mode battery charger rated for use in Zone 1 hazardous locations. Available in 12V, 24V or 48V models.

      View: Data Sheet

Pharos Marine Automatic Power, Inc.
Houston, TX - USA

+1-713-228-5208
This email address is being protected from spambots. You need JavaScript enabled to view it.

Pharos Marine Automatic Power, Inc.
Gray, LA - USA

+1-985-223-8700
This email address is being protected from spambots. You need JavaScript enabled to view it.

Pharos Marine Automatic Power, Ltd.
London, UK

+44-20-8538-1100
This email address is being protected from spambots. You need JavaScript enabled to view it.

AB Pharos Marine, Pte.
Singapore

+65-6747-9325
This email address is being protected from spambots. You need JavaScript enabled to view it.

© 2018 Pharos Marine Automatic Power Inc. All rights reserved.