Ideal for: offshore platforms and drilling rigs

Zone 1 rated microprocessor device designed to automatically detect and execute the control functions for a fog signal, or other devices, when visibility has decreased below a pre-programmed level.

View: Data Sheet | Certificates

Visibility: CAP 437 Green
Ideal for: marking the perimeter of helideck

The FA‐80EX is a LED based Low Intensity Helideck Perimeter Light designed for extreme environments such as high UV, corrosive gasses and marine conditions encountered on offshore oil and gas production facilities, drilling rigs, support vessels and refineries.

Designed to be placed in remote locations, the lantern incorporates very long lived LED’s to minimize scheduled maintenance. The FA‐80EX is fully compliant to CAP437, and meets the latest regulatory requirem

View: Data Sheet

Visibility: per CAP 437 requirements
Ideal for: warning if conditions on an installation are potentially hazardous to a helicopter or its occupants

The  FA-165EX Helideck Status Light is a Zone 1 rated, red flashing omnidirectional light designed for offshore Oil and Gas Drilling & Production Platforms and FPSO applications.  Compliant with CAP 437, the FA-165EX Helideck Status Light consists of an array of high flux LEDs mounted inside an ATEX & IECEx certified flameproof transparent enclosure..

View: Data Sheet

Visibility: per CAP 437 requirements
Ideal for: warning if conditions on an installation are potentially hazardous to a helicopter or its occupants

The FA-165EX 04 Helideck Status Light Repeater is a ZONE 1 rated, red flashing omnidirectional light designed for offshore Oil and Gas Drilling & Production Platforms and FPSO applications.  Compliant with CAP 437, the FA-165EX Helideck Status Light consists of an array of high flux LEDs mounted inside an ATEX & IECEx certified flameproof transparent enclosure.

View: Data Sheet | Certificates

Visibility: conforms to CAP 437 requirements
Ideal for: spot and flood light applications

The FA-167EX LED Lighting Fixture provides a low dazzle source for internal illumination of windsocks for helidecks and other area illumination requirements. Its rugged, heavy-duty construction provides superior performance to plastic products in high temperature and high UV marine environments.

The flood light unit is completely compliant to the latest CAP 437 requirements. The stainless steel hood prevents the possibility of pilot glare. The unit, rated for high temperature applications, is highly durable and easy to insta

View: Data Sheet | Certificates

CAP 437 Floodlight
Ideal for: marking the perimeter of helideck

The FL220-Ex is a compact, lightweight, and LED floodlight designed for use in harsh marine applications. Its rugged construction and waterproof design make it ideal for offshore oil and gas production facilities, drilling rigs, support vessels and refineries.

Designed to be placed in remote locations, the lantern incorporates very long lived LED’s to minimize scheduled maintenance. The FL-220Ex is fully compliant to CAP437, and meets the latest regulatory requirem

View: Data Sheet

Offshore Ex Central Photocell

The FCHA-51MKIII is the new Pharos Marine Photocell series. The new lightweight photocell can be made from marine grade aluminium or stainless steel. The FCHA-51MKIII can be used with the Pharos Marine PE module for the lanterns control or with the more advanced PLC systems for more complicated control systems.

View: Data Sheet

New Technology Solid State Radar Beacon (RACON). Ideal for: offshore structures, FPSOs, CALM and SPM buoys

Zone 1 Stainless Steel Racon providing radar range and bearing information to ships for safe and efficient navigation.

The new Solid State Phalcon-NT RACON fully works seamlessly with  traditional and solid state radar solutions (X and S bands), and does not require the solid state radar to change its transmission mode. The new Phalcon-NT RACON “learns” its environment and responds accordingly saving energy. 

View: Data Sheet

Ideal for: fixed offshore oil and gas drilling rigs and production platforms, CALM buoys

Zone 1 Certified, BSH-Approved AIS AtoN Station compliant with IALA A-124 and A-126, IEC 60945 and IEC 62320-2, and ITU-R M.1371.

View: Data Sheet

Ideal for: offshore oil & gas production platforms, offshore wind farms, remote locations

Customised solar power systems which may be designed to be fully compliant with NEC Class 1, Division 2 Hazardous Areas requirements or IEC Zone 1 or Zone 2 Hazardous Areas.

View: Data Sheet

Pharos Marine Automatic Power provides a solution that is both affordable and practical for any and all of your off-grid power needs.
The Photovoltaic Module is highly resistant to water, abrasion, hail impact and other severe weather conditions, making it suitable for use in any climate.

Certification: IEC 61215 AND 61730

View: Data Sheet

Ideal for: remote power requirements in Zone 1 hazardous area locations

The SPEX Zone 1 rated Photovoltaic Modules are suitable for a wide range of client projects in demanding gas & dust hazard environments. Suitable for use in any climate; highly resistant to water, abrasion, hail impact and other severe weather conditions.

View: Data Sheet

Ideal for: remote Solar PV powered systems, Zone 1 UPS systems, navigation systems & more

Zone 1 & 2 rated explosion proof battery boxes feature the versatility to house any type of sealed Nickel Cadmium or Lead Acid battery from all recognised battery manufacturers. Available in 316L stainless steel, and galvanised or painted steel.

View: Data Sheet